Skeena Intersects 5.29 g/t AuEq Over 56.34 Metres in 22 Zone Infill Drilling at Eskay Creek

VANCOUVER, BC / ACCESSWIRE / November 19, 2020 / Skeena Resources Limited (TSX:SKE)(OTCQX:SKREF) (“Skeena” or the “Company”) is pleased to report additional diamond drill core results from the Phase 1 combined campaign of definition and exploration drilling at the Eskay Creek Project (“Eskay Creek” or the “Project”) located in the Golden Triangle of British Columbia. The Phase 2 infill program, focused on resource category conversions for the Pre-Feasibility Study (“PFS”) on open-pit constrained resources, is on-going with eleven drill rigs currently active. Reference images are presented at the end of this release as well as on the Company’s website.

Eskay Creek Phase 1 Infill Drilling

22 Zone Highlights:

  • 2.17 g/t Au, 234 g/t Ag (5.29 g/t AuEq) over 56.34 m (SK-20-379)
  • 2.10 g/t Au, 183 g/t Ag (4.55 g/t AuEq) over 52.03 m (SK-20-383)
  • 1.71 g/t Au, 127 g/t Ag (3.41 g/t AuEq) over 55.34 m (SK-20-382)
  • 2.98 g/t Au, 73 g/t Ag (3.95 g/t AuEq) over 25.18 m (SK-20-378)
  • 2.04 g/t Au, 93 g/t Ag (3.28 g/t AuEq) over 46.56 m (SK-20-375)

21C Zone Highlights:

  • 9.51 g/t Au, 644 g/t Ag (18.10 g/t AuEq) over 10.24 m (SK-20-334)
  • 2.68 g/t Au, 595 g/t Ag (10.61 g/t AuEq) over 11.50 m (SK-20-357)
  • 21.24 g/t Au, 726 g/t Ag (30.92 g/t AuEq) over 7.43 m (SK-20-366)

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths range from 70-100% of reported core lengths for the 21A and 21C Zones Apparent widths are reported for the 22 Zone due to the geometry of the mineralization and the orientation of the drill holes. Length weighted AuEq composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

22 Zone Phase I Infill Continues to Confirm Modelled Mineralization
Drilling within the 22 Zone continues to yield exceptionally thick, high-grade results highlighted by 2.17 g/t Au, 234 g/t Ag (5.29 g/t AuEq) over 56.34 m (SK-20-379, apparent width) in the core of the 22 Zone, which is corroborated by up-dip intersections of 1.71 g/t Au, 127 g/t Ag (3.41 g/t AuEq) over 55.34 m and 2.10 g/t Au, 183 g/t Ag (4.55 g/t AuEq) over 52.03 m (SK-20-382 and SK-20-383, respectively, apparent widths). For comparison, this portion of the resource was informed by a historical intersection of 2.69 g/t AuEq over 47.50 m (C04-1259). The recent results confirm the reported average AuEq and Au grades of Indicated and Inferred pit constrained resources in the 22 Zone found in the Company’s 2019 Mineral Resource Estimate (“MRE”) at 3.0 g/t AuEq and 2.1 g/t AuEq, respectively. However, the recently intersected Ag grades are substantially higher.

The 22 Zone is discordant mineralization hosted within the footwall rhyolite, which is intensely altered to silica-sericite. The 22 Zone is interpreted to have developed along a sub-vertical structural conduit that crosscuts the rhyolite and fed the overlying exhalative mineralization found in the Contact Mudstones. Mineralization within the 22 Zone is vertically dipping, averages 70 m true horizontal width and has been defined by drilling over a strike length of 320 m.

21A and 21C Infill Drilling Continues to Corroborate Projected Mineralization
In addition to the results from the 22 Zone, the recently completed Phase 1 portion of the infill drilling campaign within the 21A and 21C Zones confirms the grade and spatial predictability of the Company’s 2019 MRE, which was largely informed by historical drilling results.

Exploration Update
The Company is currently drilling the Phase 2 program at Eskay Creek with eleven drill rigs and is on schedule to complete the program in December 2020. One drill rig is performing a 5,000 m resource expansion program at the Snip Project. At present, 81 drill holes are awaiting analytical results.

About Skeena
Skeena Resources Limited is a junior mining company focused on developing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling at Eskay Creek to advance the project to Pre-Feasibility. Skeena is also exploring the past-producing Snip gold mine.

On behalf of the Board of Directors of Skeena Resources Limited,

Walter Coles Jr.
President & CEO

Contact Information
Investor Inquiries: [email protected]
Office Phone: +1 604 684 8725
Company Website: www.skeenaresources.com

Qualified Persons
Exploration activities at the Eskay Creek Project are administered on-site by the Company’s Exploration Managers, Raegan Markel, P.Geo. and Adrian Newton, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.

Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labeled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company’s Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.

Drill core samples are submitted to ALS Geochemistry’s analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.

Cautionary Note Regarding Forward-Looking Statements
Certain statements made and information contained herein may constitute “forward-looking information” and “forward-looking statements” within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management’s expectations. Forward-looking statements and information may be identified by such terms as “anticipates”, “believes”, “targets”, “estimates”, “plans”, “expects”, “may”, “will”, “could” or “would”. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.

Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

Table 1: Eskay Creek Project 2020 Length Weighted Drill Hole Gold and Silver Composites:

Hole-ID

From (m)

To (m)

Core Length (m)

Au (g/t)

Ag (g/t)

AuEq (g/t)

Zone

SK-20-334

152.76

163.00

10.24

9.51

644

18.10

21C

INCLUDING

152.76

153.40

0.64

11.40

19

11.65

21C

AND

155.69

156.19

0.50

5.83

1,745

29.10

21C

AND

156.19

157.00

0.81

14.40

1,395

33.00

21C

AND

157.00

158.00

1.00

9.29

2,640

44.49

21C

AND

158.00

159.00

1.00

4.55

497

11.18

21C

AND

159.00

159.83

0.83

43.30

921

55.58

21C

AND

159.83

160.34

0.51

22.80

366

27.68

21C

SK-20-334

211.50

220.50

9.00

3.14

20

3.41

21C

SK-20-334

226.50

234.50

8.00

3.71

76

4.73

21C

INCLUDING

230.00

230.50

0.50

8.32

287

12.15

21C

AND

231.00

231.60

0.60

19.75

146

21.70

21C

SK-20-353

137.00

159.50

22.50

2.35

18

2.59

21B

INCLUDING

151.34

152.00

0.66

7.28

206

10.03

21B

SK-20-354

PENDING

SK-20-355

138.50

158.50

20.00

2.18

9

2.30

21B

SK-20-356

146.46

149.50

3.04

1.18

33

1.62

21C

SK-20-357

111.84

114.02

2.18

0.82

25

1.14

21C

SK-20-357

129.50

141.00

11.50

2.68

595

10.61

21C

INCLUDING

130.46

131.40

0.94

1.30

892

13.19

21C

AND

135.42

136.00

0.58

8.00

407

13.43

21C

AND

136.00

137.00

1.00

1.05

867

12.61

21C

AND

137.00

138.00

1.00

0.94

1,380

19.34

21C

AND

138.00

139.00

1.00

4.79

3,120

46.39

21C

SK-20-357

146.28

149.00

2.72

4.02

170

6.29

21C

SK-20-366

182.40

189.83

7.43

21.24

726

30.92

21C

INCLUDING

183.05

184.50

1.45

15.20

580

22.93

21C

AND

184.50

186.00

1.50

24.90

292

28.79

21C

AND

186.00

187.20

1.20

68.80

2,750

105.47

21C

AND

187.20

187.90

0.70

5.33

384

10.45

21C

AND

187.90

189.30

1.40

6.72

353

11.43

21C

SK-20-366

231.50

238.28

6.78

1.09

16

1.31

21C

SK-20-372

2.44

6.50

4.06

1.02

43

1.60

21A

SK-20-372

32.00

35.00

3.00

0.62

91

1.83

21A

SK-20-373

4.00

6.00

2.00

0.78

10

0.91

21A

SK-20-373

12.50

22.50

10.00

0.66

10

0.79

21A

SK-20-374

4.00

40.00

36.00

1.58

38

2.08

21A

SK-20-375

3.44

50.00

46.56

2.04

93

3.28

22

INCLUDING

31.55

32.05

0.50

1.26

979

14.31

22

AND

32.05

32.70

0.65

0.79

779

11.18

22

AND

33.23

34.00

0.77

15.85

81

16.93

22

SK-20-376

0.44

18.00

17.56

1.47

18

1.71

22

SK-20-376

25.50

31.50

6.00

1.16

5

1.22

22

SK-20-376

65.50

68.50

3.00

0.94

5

1.01

22

SK-20-377

1.44

21.00

19.56

1.98

44

2.57

22

SK-20-377

24.00

34.50

10.50

0.97

8

1.07

22

SK-20-377

37.50

45.00

7.50

1.16

21

1.44

22

SK-20-377

64.50

67.50

3.00

0.96

5

1.03

22

SK-20-377

72.00

76.50

4.50

1.03

5

1.10

22

SK-20-378

1.32

26.50

25.18

2.98

73

3.95

22

INCLUDING

10.00

11.50

1.50

20.00

537

27.16

22

SK-20-378

29.50

58.00

28.50

0.94

11

1.08

22

SK-20-378

74.50

85.50

11.00

0.90

5

0.97

22

SK-20-379

2.66

59.00

56.34

2.17

234

5.29

22

INCLUDING

5.50

7.00

1.50

5.32

358

10.09

22

AND

13.00

14.50

1.50

2.77

1,585

23.90

22

AND

14.50

16.00

1.50

2.19

621

10.47

22

SK-20-380

158.03

170.00

11.97

2.19

7

2.28

21B

SK-20-381

3.50

9.50

6.00

2.80

35

3.26

22

SK-20-381

12.50

20.00

7.50

0.76

51

1.44

22

SK-20-381

35.00

42.50

7.50

1.14

5

1.21

22

SK-20-381

53.00

60.50

7.50

0.68

36

1.16

22

SK-20-381

65.00

76.00

11.00

1.14

5

1.21

22

SK-20-382

2.66

58.00

55.34

1.71

127

3.41

22

INCLUDING

28.43

29.50

1.07

2.89

614

11.08

22

SK-20-382

61.00

76.00

15.00

0.88

47

1.50

22

SK-20-382

82.00

94.00

12.00

1.12

21

1.39

22

SK-20-383

2.47

54.50

52.03

2.10

183

4.55

22

INCLUDING

8.00

9.50

1.50

13.40

865

24.93

22

AND

14.00

15.50

1.50

3.55

556

10.96

22

AND

18.50

19.50

1.00

7.89

211

10.70

22

AND

20.50

21.50

1.00

6.83

599

14.82

22

SK-20-383

57.50

71.00

13.50

0.83

15

1.03

22

SK-20-384

PENDING

22

SK-20-385

PENDING

22

SK-20-386

PENDING

22

SK-20-387

183.50

192.28

8.78

1.39

35

1.85

22

SK-20-387

195.00

216.00

21.00

2.37

23

2.68

22

SK-20-388

12.50

18.50

6.00

1.09

6

1.16

21A

SK-20-388

21.50

39.00

17.50

1.08

23

1.38

21A

SK-20-389

1.26

50.00

48.74

6.89

122

8.52

22

INCLUDING

15.50

17.00

1.50

10.85

108

12.29

22

AND

29.13

30.50

1.37

16.90

47

17.53

22

AND

30.50

32.00

1.50

18.65

21

18.93

22

AND

32.00

33.50

1.50

9.69

52

10.38

22

AND

33.50

35.00

1.50

22.70

432

28.46

22

AND

35.00

36.50

1.50

18.80

440

24.67

22

AND

40.00

41.00

1.00

15.30

132

17.06

22

AND

41.00

42.50

1.50

35.30

247

38.59

22

AND

45.50

47.00

1.50

13.95

31

14.36

22

SK-20-390

0.38

66.50

66.12

4.33

48

4.97

22

INCLUDING

16.04

17.00

0.96

12.90

81

13.98

22

AND

17.00

18.50

1.50

17.60

94

18.85

22

AND

19.54

21.00

1.46

26.20

128

27.91

22

AND

23.87

25.30

1.43

9.19

93

10.43

22

AND

28.00

29.00

1.00

10.55

34

11.00

22

AND

29.00

30.50

1.50

11.45

26

11.80

22

SK-20-391

0.68

53.00

52.32

3.67

112

5.16

22

INCLUDING

31.40

32.18

0.78

8.73

98

10.04

22

SK-20-392

1.50

10.34

8.84

6.56

208

9.34

22

INCLUDING

3.69

5.00

1.31

20.50

927

32.86

22

SK-20-392

46.00

53.00

7.00

2.54

5

2.61

22

SK-20-393

127.10

132.00

4.90

2.32

5

2.39

21C

SK-20-393

135.00

137.00

2.00

5.81

9

5.93

21C

SK-20-394

127.50

132.50

5.00

2.73

10

2.87

21C

INCLUDING

131.00

131.57

0.57

10.85

<5

10.85

21C

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths range from 70-100% of reported core lengths for the 21A and 21C Zones Apparent widths are reported for the 22 Zone due to the geometry of the mineralization and the orientation of the drill holes. Length weighted AuEq composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

Table 2: Mine Grid Drill Hole Locations and Orientations:

Hole-ID

Easting (m)

Northing (m)

Elevation (m)

Length (m)

Azimuth (°)

Dip (°)

SK-20-334

9,775.0

10,538.0

971.4

248.0

186.1

– 79.3

SK-20-353

9,842.0

10,601.0

947.1

168.0

116.0

– 69.1

SK-20-355

9,842.0

10,601.0

950.0

170.0

102.4

– 71.2

SK-20-356

9,665.0

10,609.0

893.2

165.0

121.2

– 51.0

SK-20-357

9,664.0

10,608.0

894.5

160.0

116.1

– 57.9

SK-20-366

9,755.0

10,528.0

972.7

245.0

26.0

– 81.0

SK-20-372

9,864.0

9,954.0

1,022.3

35.0

269.5

– 49.9

SK-20-373

9,864.0

9,954.0

1,022.5

23.3

89.5

– 75.1

SK-20-374

9,864.0

9,954.0

1,021.2

40.0

329.7

– 49.8

SK-20-375

9,864.0

9,954.0

1,021.2

50.0

29.7

– 55.1

SK-20-376

9,559.0

8,864.0

1,126.1

100.0

203.0

– 50.0

SK-20-377

9,559.0

8,864.0

1,127.1

85.0

245.2

– 64.2

SK-20-378

9,559.0

8,864.0

1,126.9

100.0

203.1

– 65.1

SK-20-379

9,589.0

8,862.0

1,108.0

59.0

239.9

– 89.9

SK-20-380

9,809.0

10,565.0

960.3

180.0

99.2

– 68.9

SK-20-381

9,589.0

8,863.0

1,113.4

80.0

23.1

– 77.1

SK-20-382

9,589.0

8,862.0

1,113.9

95.0

240.1

– 77.2

SK-20-383

9,589.0

8,862.0

1,114.3

90.0

260.2

– 64.1

SK-20-387

9,700.0

10,423.0

962.3

225.0

116.0

– 70.9

SK-20-388

9,864.0

9,954.0

1,022.4

40.0

90.7

– 75.0

SK-20-389

9,535.3

8,936.9

1,140.7

80.0

228.3

– 49.9

SK-20-390

9,535.3

8,936.9

1,140.2

80.0

228.1

– 69.9

SK-20-391

9,535.3

8,936.9

1,135.3

90.0

210.2

– 57.1

SK-20-392

9,535.0

8,937.0

1,140.5

85.0

350.4

– 78.1

SK-20-393

9,775.8

10,252.5

1,015.7

154.0

170.1

– 54.1

SK-20-394

9,754.1

10,252.5

1,015.4

149.0

170.3

– 60.1

CONTACT:
Walt Coles Jr.
President & CEO

Kelly Earle
Vice President Communications
Email: [email protected]
Tel: (604) 684-8725

SOURCE: Skeena Resources Limited

View source version on accesswire.com:
https://www.accesswire.com/617427/Skeena-Intersects-529-gt-AuEq-Over-5634-Metres-in-22-Zone-Infill-Drilling-at-Eskay-Creek