Positive Exploration Results at Perseus’s Yaouré Mine

PERTH, Western Australia, Oct. 14, 2021 (GLOBE NEWSWIRE) — Perseus Mining Limited (ASX/TSX: PRU) is pleased to provide an update on recent successful exploration activities at its Yaouré Gold Mine in Côte d’Ivoire.

Highlights

  • Recent results from infill drilling at Yaouré confirms strong potential for further mineral resources beneath the currently operating CMA open pit (the “

    CMA Underground prospect

    ”).
  • Infill and down-dip extension drilling confirms gold mineralisation consistent with previous results from this area, with recent drill results including:


    • YRC1819D: 4.1m @ 1.44g/t Au from 129m & 3m @ 1.87 g/t Au from 220m

    • YRC1821D:


      9m @ 5.42 g/t Au from 221m

    • YRC1822D: 6.2m @ 7.27 g/t Au from 228, including 1m @ 20.0 g/t Au from 229m

    • YRC1840D: 1.75m @ 4.76 g/t Au from 188m

    • YRC1841D: 6m @ 3.00 g/t Au from 229m

    • YRC1842D: 8m @ 3.87 g/t Au from 221m

    • YRC1847D: 3m @ 1.53 g/t Au from 188m & 3m @ 4.52 g/t Au from 195m

    • YRC1848D: 6m @ 3.54 g/t Au from 179m, including 1m @ 13.7 g/t Au from 179m

    • YRC1848D: 7m @ 1.73 g/t Au from 194m, including 2m @ 2.73 g/t Au from 199m
  • The results from infill drilling at the CMA Underground prospect will be used to upgrade the current Inferred Mineral Resource estimate to Indicated status enabling a Pre-Feasibility Study (PFS) for an underground mining operation to be completed by late June 2022, including an initial Ore Reserve estimate.
  • Initial drilling of unexplored shallow targets at

    CMA East

    , a structure identified through the recent 3D Seismic study, has also returned encouraging results, with better results including:


    • YRC1787: 4m @ 2.34 g/t Au from 26m

    • YRC1790: 4m @ 3.94 g/t Au from 34m

    • YRC1791: 4m @ 1.14 g/t Au from 10m & 2m @ 4.18 g/t Au from 36m

    • YRC1783: 2m @ 2.43 g/t Au from 16m & 22m @ 3.07 g/t Au from 24m

    • YRC1785: 4m @ 1.26 g/t Au from 38m & 6m @ 1.73 g/t Au from 46m

    • YRC1796: 6m @ 1.66 g/t from 10m

    • YRC1797: 6m @ 2.75 g/t from 46m



Perseus’s Managing Director and CEO Jeff Quartermaine said:


“Having commenced gold production at our third gold mine, Yaouré, in December 2020, Perseus is now moving closer to reaching our Group target of producing 500,000 ounces of gold per year from FY2022. Our focus is now turning to maintaining this level of production out to the end of the current decade and beyond.


Our latest infill and step out drilling results from below Yaouré’s CMA open pit are encouraging, suggesting that with further successful drilling, material additional Indicated Mineral Resources, capable of being economically mined using underground mining methods, may be delineated.


In addition, results from initial drilling of previously unexplored shallow targets at CMA East are also very promising. Identified by a recent 3-D seismic survey of the area, this mineralisation is close to surface and certainly warrants further drilling along strike and down dip to provide us with a greater understanding of the mineral potential of this area.”


BACKGROUND

Perseus has focused recent exploration activities on the Yaouré permits at the CMA Underground and CMA East seismic prospects, both within two kilometres of the Yaouré mill


(Appendix 1 – Figure 1.1).


The results received to date demonstrate the potential for the Company to materially grow its gold inventory at Yaouré organically, through further drilling success.


CMA UNDERGROUND RESOURCE DRILLING, YAOURÉ

Drilling to date at the CMA Underground prospect has focused on infill drilling to firm up previously defined underground resources extending below the currently planned CMA pit. Perseus defined an Inferred Mineral Resource of 1.8 million tonnes grading 6.1 g/t Au, extending to a maximum 275m down dip beneath the open pit resource (refer Resources and Reserves ASX announcement 24 August 2021), with potential to extend mineralisation further down dip beyond this


(Appendix 1 – Figure 1.2)



.

Perseus has also completed a Scoping Study which identified the potential to mine the CMA structure using underground mining methods (refer to “Perseus Mining Completes Scoping Study for Potential Underground Mine at Yaouré” dated 5th November 2018).

Due to the imminent cutback of the CMA South open pit, and likely loss of suitable sites for drill pads, the first stage of down-dip drilling has focussed on the southern end of the CMA structure where grades are generally lower than at the northern end. Drilling to date has comprised 6,476.7m in 34 RC pre-collared DD holes, infilling the existing 50 x 50m coverage to a nominal 25 x 25m pattern to allow conversion of the Inferred resource to Indicated. Results to date from the infill drilling program have been encouraging, with intercepts generally consistent with those previously encountered in both thickness and grade


(Appendix 1 – Figures 1.3-1.5)


. The style of mineralisation is also consistent with previous intersections, comprising pervasive, moderate to strong, pink-pale brown albite and carbonate alteration developed within a well-defined structure marked by quartz carbonate veins, fault veins, multi dilatant fault breccia, cataclasis and shearing.

Step-out drilling to investigate the next 300m down-dip from the current CMA Underground resource has also commenced, with 2,512m of RC pre-collars drilled in 27 holes. Drilling of diamond tails to complete these holes to their targeted depth has commenced, with 827.3m drilled in two holes. The step-out program is guided by Perseus’s early 2020 3D seismic survey that clearly identified the CMA structure extending to depth beyond the current drill coverage. Drilling is being undertaken on an initial 100 x 200m pattern to better define the position of the CMA structure and the intensity of mineralisation. If results are encouraging, this will be infilled to 100 x 100m to allow an initial Inferred Mineral Resource Estimate.

Better intercepts from the CMA infill drilling and from the Yaouré step out drilling are shown in


Table 1


below, with a complete summary of significant results included in


Appendix




2









Table 2.1



and



Table 2.2



respectively.


CMA EAST SEISMIC TARGET DRILLING, YAOURÉ

Perseus has also made progress in testing drill targets identified from a 3D seismic survey completed at Yaouré in 2020. Interpretation of data from the Yaouré 3D seismic survey revealed several shallowly east-dipping CMA-like structures in the hanging wall of the main CMA structure at depth. Extrapolation of these structures to the near surface suggested they would daylight in two sets around 500m and 2000m east of the CMA pit, converging to the south in the Kongonza area. To test these targets, Perseus drilled 73 shallow RC holes for 5,740m in 13 east-west traverses across the trend of the structures (


Appendix 1 – Figure 1.6


).

Results have been encouraging, with potentially economic widths and grades encountered in CMA-style mineralisation intersected in the structure east of the CMA. Drilling of the structure further east is ongoing, encouraged by recent deep artisanal mining coincident with its interpreted surface trace. Further drilling is planned to follow up these structures to the north and at depth.

Better intercepts from the seismic target drilling are shown in


Table 1


below, with a complete summary of significant results included in


Appendix 2 – Table 2.3


.



Table 1: Intercepts from CMA Underground, CMA Down-dip and CMA East seismic drilling



Hole ID



From (m)



To (m)


Gold Intercept



Comment


CMA Underground Resource Drilling

YRC1819D
129 133.1 4.1m @ 1.44 g/t

YRC1819D
220 223 3m @ 1.87 g/t CMA fw lode

YRC1821D
221 230 9m @ 5.42 g/t CMA fw lode

YRC1822D
228 234.2 6.2m @ 7.27 g/t CMA fw lode

including
229 230 1m @ 20.0 g/t

YRC1823D
192 193 1m @ 3.90 g/t CMA fw lode

YRC1840D
188 189.75 1.75m @ 4.76 g/t CMA fw lode

YRC1841D
229 235 6m @ 3.00 g/t CMA fw lode

YRC1842D
221 229 8m @ 3.87 g/t CMA fw lode

YRC1847D
188 191 3m @ 1.53 g/t CMA hw lode

YRC1847D
195 198 3m @ 4.52 g/t CMA fw lode

YRC1848D
179 185 6m @ 3.54 g/t CMA hw lode

including
179 180 1m @ 13.7 g/t

YRC1848D
194 201 7m @ 1.73 g/t CMA fw lode

including
199 201 2m @ 2.73 g/t

YRC1849D
219 220 1m @ 1.26 g/t CMA fw lode

CMA Down-dip Drilling

YRC1851D
68 80 12m @ 1.37 g/t Pre-collar section

YRC1853D
96 100 4m @ 1.40 g/t Pre-collar section

YRC1863D
0 32 32m @ 2.37 g/t Pre-collar section

YRC1863D
60 64 4m @ 9.58 g/t Pre-collar section

CMA Seismic Targets Drilling

YRC1787
26 30 4m @ 2.34 g/t Western structure

YRC1790
34 38 4m @ 3.94 g/t Western structure

YRC1791
10 14 4m @ 1.14 g/t Western structure

YRC1791
36 38 2m @ 4.18 g/t Western structure

YRC1783
16 18 2m @ 2.43 g/t Western structure

YRC1783
24 44 22m @ 3.07 g/t Western structure

YRC1785
38 42 4m @ 1.26 g/t Western structure

YRC1785
46 50 6m @ 1.73 g/t Western structure

YRC1796
10 16 6m @ 1.66 g/t Western structure

YRC1797
46 52 6m @ 2.75 g/t Western structure

YRC1778
70 76 6m @ 1.07 g/t Kongonza


NEXT STEPS AT CMA

Ongoing exploration and study programmes at Yaouré will focus on:

  • Continuation of drilling to convert the Inferred Resource at CMA to an Ore Reserve to be potentially exploited by underground mining methods and drilling down dip of the Inferred Resource to identify the potential for further resource extensions.

    The drilling to convert the Inferred CMA resource to an Ore Reserve is being carried out as the first part of a Prefeasibility Study. Geotechnical, hydrological, mining and metallurgical studies will progressively commence as more drilling and assaying results are received. Target completion for the Prefeasibility Study is the end of the June Quarter 2022, with timing dependent on the ultimate footprint size of the orebody.

  • Continuation of drill testing of targets generated from the 3D seismic survey, with an initial focus on near-surface targets.
  • Aircore drilling and augering at early-stage regional prospects such as Degbezere NE.



This announcement has been approved for release by Perseus’s Managing Director and Chief Executive Officer, Jeff Quartermaine.



Competent




Person




Statement:




The information in this report and the attachments that relate to exploration drilling results at the Yaouré Project is based on, and fairly represents, information and supporting documentation prepared by Dr Douglas Jones, a Competent Person who is a Chartered Professional Geologist. Dr Jones is the Group General Manager Exploration of the Company. Dr Jones has sufficient experience, which is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’) and to qualify as a “Qualified Person” under National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”). Dr Jones consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.



Caution




Regarding




Forward




Looking Information:




This report contains forward-looking information which is based on the assumptions, estimates, analysis and opinions of management made in light of its experience and its perception of trends, current conditions and expected developments, as well as other factors that management of the Company believes to be relevant and reasonable in the circumstances at the date that such statements are made, but which may prove to be incorrect. Assumptions have been made by the Company regarding, among other things: the price of gold, continuing commercial production at the Yaouré Gold Mine, the Edikan Gold Mine and the Sissingué Gold Mine without any major disruption


due to the COVID-19 pandemic or otherwise, the receipt of required governmental approvals, the accuracy of capital and operating cost estimates, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain financing as and when required and on reasonable terms. Readers are cautioned that the foregoing list is not exhaustive of all factors and assumptions which may have been used by the Company. Although management believes that the assumptions made by the Company and the expectations represented by such information are reasonable, there can be no assurance that the forward-looking information will prove to be accurate. Forward-looking information involves known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any anticipated future results, performance or achievements expressed or implied by such forward-looking information. Such factors include, among others, the actual market price of gold, the actual results of current exploration, the actual results of future exploration, changes in project parameters as plans continue to be evaluated, as well as those factors disclosed in the Company’s publicly


filed


documents. The Company believes that the assumptions and expectations reflected in the forward-looking information are reasonable. Assumptions have been made regarding, among other things, the Company’s ability to carry on its exploration and development activities, the timely receipt of required approvals, the price of gold, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain financing as and when required and on reasonable terms. Readers should not place undue reliance on forward-looking information. Perseus does not undertake to update any forward-looking information, except in accordance with applicable securities laws.


ASX/TSX CODE: PRU


REGISTERED OFFICE:

Level 2

437 Roberts Road

Subiaco WA 6008

Telephone: +61 8 6144 1700

Email:

[email protected]



WWW.PERSEUSMINING.COM


CONTACTS:


Jeff Quartermaine



Managing Director & CEO



[email protected]


Nathan Ryan



Media Relations


+61 4 20 582 887


[email protected]

APPENDIX 1 – FIGURES



Figure 1.1: Yaouré Gold Project – Tenements and Prospects


https://www.globenewswire.com/NewsRoom/AttachmentNg/979f79c7-0f5c-4e17-b269-cb85fbc5564e



Figure 1.2: CMA Underground Resource Drilling and Results Summary


https://www.globenewswire.com/NewsRoom/AttachmentNg/66d56fff-3909-4bae-be54-72fbb0cf1d4f



Figure 1.3: CMA Underground Resource – Long Section


https://www.globenewswire.com/NewsRoom/AttachmentNg/7fa7e16c-174c-43f0-b3fc-44156714d657



Figure 1.4: CMA Underground Resource – Drill Section 776560mN


https://www.globenewswire.com/NewsRoom/AttachmentNg/58d10b4a-84f6-4c38-9b3d-40815f7e851d



Figure 1.5: CMA Underground Resource – Drill Section 776785mN


https://www.globenewswire.com/NewsRoom/AttachmentNg/169aeb91-736a-48d1-b2b8-f9559cffa2d3



Figure 1.6: CMA East & Kongonza Seismic Drilling & Results Summary


https://www.globenewswire.com/NewsRoom/AttachmentNg/c142ab76-0610-4bb8-889b-2eb044ba3b06

APPENDIX 2 – SIGNIFICANT INTERCEPTS TABLES



Table 2.1: CMA Underground Resource Drilling – drill holes and significant assays


(Based on lower cut-off of 0.5 g/t Au with maximum 2m internal waste <0.5 g/t)

Hole ID

East North Drill Type

Azimuth Dip Depth No of samples

From To Width Grade Comment


(mE)

(mN)

(°)

(°)

(m)

(m)

(m)

(m)

(g/t)
YRC1819D 221631 776585 RCDD 270 -55 237.2 5 129 133.1 4.1 1.44
3 220 223 3 1.87 CMA fw lode
YRC1820D 221640 776861 RCDD 270 -55 80 abandoned
YRC1821D 221637 776861 RCDD 270 -55 240 9 221 230 9 5.42 CMA fw lode
YRC1822D 221650 776785 RCDD 270 -50 244.1 8 228 234.2 6.2 7.27 CMA fw lode
including 1 229 230 1 20.0
YRC1823D 221590 776611 RCDD 270 -50 207.2 1 192 193 1 3.90 CMA fw lode
YRC1840D 221596 776660 RCDD 270 -50 202 2 188 189.75 1.75 4.76 CMA fw lode
YRC1841D 221652 776810 RCDD 270 -50 259.3 6 229 235 6 3.00 CMA fw lode
YRC1842D 221639 776760 RCDD 270 -55 238.3 10 221 229 8 3.87 CMA fw lode
YRC1847D 221579 776560 RCDD 270 -55 216.2 3 188 191 3 1.53 CMA hw lode
3 195 198 3 4.52 CMA fw lode
YRC1848D 221578 776560 RCDD 270 -50 213.2 6 179 185 6 3.54 CMA hw lode
including 1 179 180 1 13.7
7 194 201 7 1.73 CMA fw lode
including 2 199 201 2 2.73
YRC1849D 221629 776710 RCDD 270 -55 234.2 1 219 220 1 1.26 CMA fw lode



Table 2.2: CMA Down-Dip Extension – drill holes and significant assays


Hole ID


East

North

Drill Type


Azimuth

Dip

Depth

No of samples


From

To

Width

Grade

(mE)

(mN)

(°)

(°)

(m)

(m)

(m)

(m)

(g/t)

CMA Down -dip Drilling

YRC1850AD
222234.504 777335.204 RC_DD 270 -60 100 Assay Pending

YRC1851D
222191.156 777235.38 RC_DD 270 -60 100 2 0 8 8 0.42

YRC1851D
222191.156 777235.38 RC_DD 270 -60 100 3 68 80 12 1.37

YRC1852D
222180.682 777135.16 RC_DD 270 -60 100 1 24 28 4 0.38

YRC1852D
222180.682 777135.16 RC_DD 270 -60 100 1 96 100 4 0.29

YRC1853D
222151.108 777035.49 RC_DD 270 -60 100 1 0 4 4 0.87

YRC1853D
222151.108 777035.49 RC_DD 270 -60 100 1 20 24 4 0.28

YRC1853D
222151.108 777035.49 RC_DD 270 -60 100 1 36 40 4 0.83

YRC1853D
222151.108 777035.49 RC_DD 270 -60 100 1 76 80 4 0.23

YRC1853D
222151.108 777035.49 RC_DD 270 -60 100 1 96 100 4 1.4

YRC1854D
222102.517 776934.69 RC_DD 270 -60 100 1 0 4 4 0.29

YRC1854D
222102.517 776934.69 RC_DD 270 -60 100 1 16 20 4 0.32

YRC1854D
222102.517 776934.69 RC_DD 270 -60 100 1 24 28 4 0.22

YRC1854D
222102.517 776934.69 RC_DD 270 -60 100 1 32 36 4 0.26

YRC1855AD
221973.917 777435.47 RC_DD 270 -60 100 1 48 52 4 0.24

YRC1856AD
221832.843 777636.16 RC_DD 270 -60 100 3 12 24 12 0.32

YRC1856AD
221832.843 777636.16 RC_DD 270 -60 100 1 40 44 4 0.22

YRC1857D
221987.234 777535.058 RC_DD 270 -60 100 Assay Pending

YRC1858D
221978.022 777635.201 RC_DD 270 -60 100 Assay Pending

YRC1859D
221919.444 777734.921 RC_DD 270 -60 100 Assay Pending

YRC1860D
222061 777735 RC_DD 270 -60 100 Assay Pending

YRC1861D
222131 777635 RC_DD 270 -60 100 Assay Pending

YRC1862D
222021.17 777234.97 RC_DD 270 -60 61 1 40 44 4 0.31

YRC1863D
222325.79 777234.79 RC_DD 270 -60 100 8 0 32 32 2.37

YRC1863D
222325.79 777234.79 RC_DD 270 -60 100 1 44 48 4 0.26

YRC1863D
222325.79 777234.79 RC_DD 270 -60 100 1 60 64 4 9.58

YRC1863D
222325.79 777234.79 RC_DD 270 -60 100 1 72 76 4 0.48

YRC1863D
222325.79 777234.79 RC_DD 270 -60 100 1 92 96 4 0.21

YRC1864D
222314.18 777135.22 RC_DD 270 -60 90 2 0 8 8 0.46

YRC1864D
222314.18 777135.22 RC_DD 270 -60 90 1 48 52 4 0.4

YRC1865D
222289.84 777035.07 RC_DD 270 -60 100 2 0 8 8 0.26

YRC1865D
222289.84 777035.07 RC_DD 270 -60 100 1 48 52 4 0.2

YRC1865D
222289.84 777035.07 RC_DD 270 -60 100 1 68 72 4 0.78

YRC1866D
222234.43 776935.19 RC_DD 270 -60 61 2 0 8 8 0.38

YRC1866D
222234.43 776935.19 RC_DD 270 -60 61 1 44 48 4 0.28

YRC1867D
222246.32 776834.99 RC_DD 270 -60 100 2 0 8 8 0.71

YRC1867D
222246.32 776834.99 RC_DD 270 -60 100 1 28 32 4 0.27

YRC1868D
221893.66 776734.38 RC_DD 270 -60 60 2 0 8 8 0.5

YRC1869D
222013.27 777034.85 RC_DD 270 -60 60 1 24 28 4 0.21

YRC1870D
222005.02 777135.01 RC_DD 270 -60 100 1 48 52 4 0.21

YRC1871D
222133.11 777535.1 RC_DD 270 -60 100 1 36 40 4 0.2

YRC1871D
222133.11 777535.1 RC_DD 270 -60 100 1 88 92 4 0.52

YRC1872D
222106.4 776835 RC_DD 270 -60 91 7 0 13 13 0.29

YRC1873D
221973.703 776835.11 RC_DD 270 -60 100 Assay Pending



Table 2.3: CMA East Seismic Drilling – drill holes and significant assays


Hole ID


East

North

Drill Type


Azimuth

Dip

Depth

No of samples


From

To

Width

Grade

(mE)

(mN)

(°)

(°)

(m)

(m)

(m)

(m)

(g/t)

CMA Seismic Target Drilling

YRC1770
223249.46 776900.117 RC 270 -60 100 1 10 12 2 0.29

YRC1770
223249.46 776900.117 RC 270 -60 100 1 24 26 2 0.25

YRC1770
223249.46 776900.117 RC 270 -60 100 1 34 36 2 0.24

YRC1770
223249.46 776900.117 RC 270 -60 100 2 53 55 2 1.1

YRC1773
223524.817 775900.154 RC 270 -60 87 1 26 28 2 0.46

YRC1782
221898.68 777814.64 RC 265 -60 120 1 24 26 2 0.25

YRC1782
221898.68 777814.64 RC 265 -60 120 1 82 84 2 0.22

YRC1782
221898.68 777814.64 RC 265 -60 120 1 96 98 2 2.91

YRC1782
221898.68 777814.64 RC 265 -60 120 4 106 114 8 1.06

YRC1783
221814.4 777806.28 RC 265 -60 80 1 16 18 2 2.43

YRC1783
221814.4 777806.28 RC 265 -60 80 11 24 46 22 3.07

YRC1783
221814.4 777806.28 RC 265 -60 80 1 70 72 2 0.23

YRC1784
221777.36 777799.92 RC 265 -60 60 1 0 2 2 0.27

YRC1784
221777.36 777799.92 RC 265 -60 60 1 58 60 2 0.22

YRC1785
221933.44 777586.71 RC 265 -60 80 2 38 42 4 1.26

YRC1785
221933.44 777586.71 RC 265 -60 80 3 46 52 6 1.73

YRC1786
221894.6 777586.49 RC 265 -60 80 3 64 70 6 0.95

YRC1787
221855.62 777586.54 RC 265 -60 80 2 26 30 4 2.34

YRC1787
221855.62 777586.54 RC 265 -60 80 1 48 50 2 0.98

YRC1788
221814.35 777586.83 RC 270 -60 60 1 4 6 2 0.2

YRC1789
221924.13 777386.95 RC 270 -60 80 1 18 20 2 0.34

YRC1789
221924.13 777386.95 RC 270 -60 80 1 36 38 2 2.9

YRC1789
221924.13 777386.95 RC 270 -60 80 1 58 60 2 1.51

YRC1789
221924.13 777386.95 RC 270 -60 80 2 64 68 4 0.28

YRC1790
221884.22 777386.68 RC 265 -60 80 1 6 8 2 0.24

YRC1790
221884.22 777386.68 RC 265 -60 80 1 10 12 2 0.27

YRC1790
221884.22 777386.68 RC 265 -60 80 1 26 28 2 0.3

YRC1790
221884.22 777386.68 RC 265 -60 80 2 34 38 4 3.94

YRC1790
221884.22 777386.68 RC 265 -60 80 1 46 48 2 0.49

YRC1791
221845.92 777385.89 RC 265 -60 80 2 10 14 4 1.14

YRC1791
221845.92 777385.89 RC 265 -60 80 1 36 38 2 4.18

YRC1791
221845.92 777385.89 RC 265 -60 80 1 64 66 2 0.39

YRC1791
221845.92 777385.89 RC 265 -60 80 1 74 76 2 0.4

YRC1792
221806.56 777384.92 RC 265 -60 60 1 28 30 2 0.36

YRC1793
221881.85 777186.54 RC 265 -60 60 1 6 8 2 0.21

YRC1793
221881.85 777186.54 RC 265 -60 60 1 18 20 2 0.22

YRC1795
221960.14 777187.76 RC 265 -60 80 2 0 4 4 0.37

YRC1795
221960.14 777187.76 RC 265 -60 80 1 20 22 2 0.39

YRC1796
221999.21 777186.72 RC 265 -60 80 2 0 4 4 0.24

YRC1796
221999.21 777186.72 RC 265 -60 80 3 10 16 6 1.66

YRC1796
221999.21 777186.72 RC 265 -60 80 1 38 40 2 0.42

YRC1796
221999.21 777186.72 RC 265 -60 80 1 58 60 2 0.24

YRC1797
221960.22 776986.3 RC 265 -60 60 3 0 6 6 0.65

YRC1797
221960.22 776986.3 RC 265 -60 60 3 46 52 6 2.75

YRC1798
221999.51 776987.09 RC 265 -60 80 4 0 8 8 0.61

YRC1798
221999.51 776987.09 RC 265 -60 80 9 18 36 18 0.35

YRC1799
222219.31 776849.42 RC 220 -60 100 2 0 4 4 0.25

YRC1800
222189.82 776819.3 RC 221 -55 80 2 0 4 4 0.32

YRC1801
222159.22 776788.62 RC 222 -55 80 1 74 76 2 0.27

YRC1765
223455 776359 RC 270 -60 100 NSI

YRC1766
223663 776404 RC 270 -60 100 NSI

YRC1767
223336 776894 RC 270 -60 100 NSI

YRC1768
223443 776902 RC 270 -60 100 NSI

YRC1769
223547 776910 RC 270 -60 102 NSI

YRC1771
223575 775900 RC 270 -60 84 NSI

YRC1772
223620 775890 RC 270 -60 90 NSI

YRC1794
221920 777187 RC 270 -60 80 NSI

YRC1930
222970 777910 RC 270 -60 84 Assay Pending

YRC1931
222892 777906 RC 270 -60 84 Assay Pending

YRC1932
223127 777397 RC 270 -60 90 Assay Pending

YRC1933
223213 777384 RC 270 -60 84 Assay Pending

YRC1934
223325 777395 RC 270 -60 84 Assay Pending

YRC1935
223424 777402 RC 270 -60 84 Assay Pending

YRC1936
223026 777422 RC 270 -60 84 Assay Pending

YRC1937
222925.594 777502.522 RC 270 -60 96 Assay Pending

APPENDIX 3 – JORC TABLE 1 – YAOURÉ EXPLORATION


JORC 2012 Table 1 – Section 1 sampling techniques and data

(Criteria in this section apply to all succeeding sections)


Criteria

JORC Code Explanation

Commentary


Sampling

techniques


Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling.


Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.


Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.

Drilling to define underground resources at CMA Lode commenced in July 2021 and is ongoing at the date of the report to which this table refers. Drilling completed in the period to 28 September comprises:

2,482 metres of RC drilling and 6,476.7 metres of core drilling in 34 completed pre-collared diamond core holes.

3,426 metres of RC drilling in 47 pre-collars drilled ahead of core drilling.

RC drilling used face-sampling hammers with 136mm hole diameter. Samples were collected at one metre intervals and logged visually for recovery, sample condition (dry, damp, wet) and contamination. Sample recoveries were measured by weighing bulk recovered samples. RC samples from pre-collars where mineralisation is not expected were normally composited to 4m intervals for assaying.

Diamond drilling utilised HQ triple-tube (61.1mm Ø) drilling in weathered materials and NQ2 (50.6mm Ø) or NQ (47.6mm Ø) core in fresh rock.



Drilling

techniques


Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).
RC drilling used face-sampling hammers with 136mm hole diameter. Samples were collected at one metre intervals. RC samples from pre-collars where mineralisation is not expected were normally composited to 4m intervals for assaying.

Diamond drilling utilised HQ triple-tube (61.1mm Ø) drilling in weathered materials and NQ2 (50.6mm Ø) or NQ (47.6mm Ø) core in fresh rock. Core in fresh rock was oriented using a MAGSHOT II (Wellforce) and an ORISHOT II (Reflex) device.



Drill sample

recovery


Method of recording and assessing core and chip sample recoveries and results assessed.


Measures taken to maximise sample recovery and ensure representative nature of the samples.


Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.

RC drill samples were logged visually for sample condition (dry, damp, wet) and contamination. Sample recoveries were measured by weighing bulk recovered samples. Preliminary evaluation indicates that RC sample recoveries have been satisfactory. There were no wet samples logged in the CMA UG RC pre-collar holes.

Diamond core recoveries were measured linearly per drill run. Core recoveries average approximately 85% in weathered materials and 100% in fresh rock.

The Competent Person considers that there are presently insufficient data available to permit a meaningful examination of potential relationships between sample recovery and gold grade.



Logging


Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.


Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography.


The total length and percentage of the relevant intersections logged.

Geological logs are available for the entire lengths of all drill holes. The logging is qualitative in nature.

Sieved samples of RC chips from each metre of drilling were logged for colour, rock type, alteration type and intensity, vein quartz content, sulphide mineralisation, weathering and oxidation. The chips are stored in plastic chip trays and the trays photographed.

Diamond drill core was logged for geology, structure and geotechnical characteristics. Geological logging included colour, lithology, weathering, oxidation, vein type and vein volume percentage, sulphide species and their estimated percentage, alteration and alteration intensity. Structural logging included fault, fold, cleavage and joint orientation, lithological contacts and vein orientations. Drill core was photographed prior to cutting.



Sub-

sampling

techniques

and sample preparation


If core, whether cut or sawn and whether quarter, half or all core taken.


If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry.


For all sample types, the nature, quality and appropriateness of the sample preparation technique.


Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.


Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling.


Whether sample sizes are appropriate to the grain size of the material being sampled.

RC drill samples were collected at drill sites over one metre intervals and manually split using multi-stage riffle splitters to produce assay sub-samples averaging around 3kg. All RC holes have been assayed in entirety. RC samples from pre-collars where mineralisation is not expected were normally composited to 4m intervals for assaying.

In weathered materials, diamond core was halved using spatulas or knives. In fresh rock, core was sawn in half using a diamond blade saw, with one half sent for assaying and the other half stored in core trays for reference. Samples were normally taken at 1 metre intervals. For CMA underground resource definition holes, only core intervals with visible alteration and mineralisation plus approximately 10m up- and down-hole were sampled. For exploration drill holes, all diamond drill core has been assayed.

All sample preparation has been undertaken at Perseus’s Yaouré sample preparation facility operated and supervised by Perseus personnel.

Preparation of core and RC samples followed a standard path of drying at 105 degrees C for at least 12 hours, crushing the entire sample to 85% passing -2mm and grinding a 1.5kg split to 85% passing 75 microns. 300g pulp subsamples are selected by multiple scoop passes.

Quality control measures adopted to confirm the representivity of samples from RC and diamond drilling include:

  • Field re-splits of RC samples at an average frequency of around one duplicate per 20 primary samples respectively.
  • Submission of coarse blanks at an average of around 1 blank per 20 primary samples
  • Use of quartz wash between every sample in crushing and pulverising equipment
  • Screening of approximately 1:20 pulp samples to check grind size

Sample preparation techniques are considered appropriate to the style of mineralisation. Available information indicates that sample sizes are appropriate to the grain size of the material being sampled.



Quality of

assay data

and

laboratory

tests


The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.


For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.


Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.

All RC and diamond core samples have been assayed by 50g fire assay with AAS determination by Intertek Testing Services Ghana at their Tarkwa assay laboratory or by Bureau Veritas at their Abidjan laboratory. The technique is considered a total extraction technique.

Quality control procedures include submission of coarse blanks (1:20) and certified reference standards (1:20).

The available information indicates that the assaying of RC and core samples is free from any significant biases and is of acceptable accuracy.



Verification of sampling

and

assaying


The verification of significant intersections by either independent or alternative company personnel.


The use of twinned holes.


Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.


Discuss any adjustment to assay data.

Numerous significant mineralised intersections have been checked against visual alteration and sulphide mineralisation in drill chips and core.

None of the holes in the report to which this table relates have been deliberately twinned.

Geology, structure and geotechnical logs are paper based. Sample intervals are recorded in pre-numbered sample ticket books. All logging, sample interval and survey data are manually entered to digital form on site and stored in an acQuire relational database. Data exports are normally in the form of MS Access files.

Data verification procedures include automated checks to:

  • prevent repetition of sample numbers
  • prevent overlap of from-to intervals in logging and sample interval data
  • ensure that total hole depths in collar, assay and geology tables match
  • ensure that drill collar coordinates are within the project’s geographic limits

Down-hole survey data are examined for large deviations in dip or azimuth that may represent erroneous data or data entry errors and corrected on a case-by-case basis including estimates of dips and azimuths where the original data appear to be in error.

Additional data checks include viewing drill hole traces, geological logging and assays in plan and section views.



Location of

data points


Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.


Specification of the grid system used.


Quality and adequacy of topographic control.

Drill hole collars have been surveyed by qualified mine surveyors using differential GPS equipment with coordinates recorded in UTM grid, WGS84 Zone 30N datum.

All RC and diamond core holes have been surveyed at 12m depth and at approximately 30m down-hole increments using digital compass instruments.

A topographic surface has been established by a LiDAR survey conducted in 2017. The topographic surface is reliable to +/- 0.2m.

Topographic control is adequate for the current work being undertaken at Yaouré.



Data

spacing

and

distribution


Data spacing for reporting of Exploration Results.


Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.


Whether sample compositing has been applied.

The CMA Lode is delineated by regular drilling at 50mN x 25mE spaced holes to between 150 and 200 metres below natural surface. Partial coverage at 50mN x 50mE spacing extends to between 200 and 275 metres below surface. Holes have generally been drilled dipping at -55 to -75 degrees toward 270 degrees (UTM grid) azimuth.



Orientation

of data in

relation to

geological

structure


Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.


If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.

Drill holes are oriented approximately orthogonal to the dip and strike of the CMA Lode. Drill intercept lengths closely approximate true widths of mineralisation.

The relationship between drill intercept lengths and true widths of mineralisation in the CMA East Seismic Target area is not known at the time of this report.



Sample

security


The measures taken to ensure sample security.
RC and core samples were delivered to the secure core yard compound at Yaouré mine by Perseus personnel. RC field sample splits and samples of half diamond core were placed in numbered bags and those bags, in turn, placed into polywoven sacks that were closed with plastic cable ties prior to transport to the Yaouré sample preparation facility by Perseus personnel. Security guards were employed at drilling sites, the core yard compound and the sample preparation facility on a 24 hour per day basis.

Results of field duplicates along with the general consistency of assay results between neighbouring drill holes and drilling methods provide confidence in the general reliability of the assay data.



Audits or

reviews


The results of any audits or reviews of sampling techniques and data.
The Yaouré sample preparation facility has previously been subject to formal audit, the last being in 2017. Standard operating procedures have not changed materially since that audit.

The Competent Person has reviewed the available sampling and assaying quality control data and found no errors or bias likely to significantly affect the reliability of the exploration data. These reviews included review of database consistency, comparisons between database records and laboratory source files, and review of QAQC information.

The Competent Person considers that the sample preparation, security and analytical procedures adopted for the CMA resource drilling provide an adequate basis for the reporting of Exploration Results.


JORC 2012 Table 1 – Section 2 Reporting of Exploration Results


(Criteria listed in the preceding section also apply to this section)


Criteria

JORC Code explanation

Commentary


Mineral

tenement and

land tenure

status


Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.
The drill holes discussed in the report to which this table relates are located within the Yaouré exploitation permit (PE50). The permit has an expiry date of 23 April 2030. The permit is held by Perseus’s subsidiary Perseus Mining Yaouré SA in which the government of Côte d’Ivoire holds 10% free carried interest. Additionally, the Government of Côte d’Ivore is entitled to a royalty on nett revenue (revenue minus transport and refining costs) as follows:


The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.
Spot price per ounce – London PM Fix Royalty

Rate
Less than or equal to US$1,000 3 %
Higher than US$1,000 and less than or equal to US$1,300 3.5 %
Higher than US$1,300 and less than or equal to US$1,600 4 %
Higher than US$1,600 and less than or equal to US$2,000 5 %
Higher than US$2,000 6 %

A further 0.5% of nett revenue is required to be paid to a local community development fund.
The reported exploration areas have no known exploration-specific environmental liabilities.



Exploration

done by other

parties


Acknowledgment and appraisal of exploration by other parties.
Exploration geochemical sampling, trenching and exploration and resource definition drilling have previously been carried out by BRGM, Cluff and Amara. Drill hole data deriving from work by Cluff and Amara are considered reliable.



Geology


Deposit type, geological setting and style of mineralisation.
Yaouré may be described as orogenic lode-style gold mineralisation. The Yaouré project comprises two adjacent deposits, Yaouré and CMA, that occur near the south-eastern flank of the Bouaflé greenstone belt in central Côte d’Ivoire. Mineralisation is hosted by Paleoproterozoic aged metabasalts and felsic intrusive rocks of the Birimian Supergroup. The rocks are metamorphosed to lower greenschist facies and only locally feature penetrative deformation fabrics.

In both deposits, gold is associated with disseminated pyrite. At CMA deposit, mineralisation is associated with quartz-albite-carbonate veining in reverse fault structures that dip at 25 to 35 degrees to the east. Yaouré deposit comprises several mineralisation styles controlled by east-dipping structures, similar to CMA, in addition to mineralisation associated with quartz-tourmaline-chlorite-carbonate veining controlled by NE and NW striking, sub-vertical faults and also stockwork quartz veins with associated alteration selvages hosted by a granodiorite intrusive body.

The combined deposits extend over an area around 1.4 km east west by 2.1 km north-south.



Drill hole

Information


A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes:
A table of drill hole and intercept details is included in the report to which this table relates.

•  easting and northing of the drill hole collar

•  elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar

•  dip and azimuth of the hole

•  down hole length and interception depth

•  hole length.

If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.



Data

aggregation

methods


In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually Material and should be stated.

The cut-off grade, minimum down-hole length and maximum included internal waste are clearly stated in the report to which this table relates.

Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.
Higher-grade “included” intercepts are clearly reported.

The assumptions used for any reporting of metal equivalent values should be clearly stated.

Drill hole intercepts have not been reported as metal equivalents.


Relationship

between mineralization

widths and intercept

lengths


These relationships are particularly important in the reporting of Exploration Results.
The geometry of the CMA Lode has been clearly demonstrated by previous drilling. The lengths of drill intercepts of that structure in the report to which this table relates closely approximate true widths.

If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.

If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’).

The relationship between drill intercept lengths and true widths of mineralisation in the CMA East Seismic Target is not known at the time of this report.


Diagrams


Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.

Appropriate plans and sections are included in the report to which this table relates.


Balanced reporting


Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.

Holes that did not intercept significant mineralisation are shown on plans and cross-sections and “NSI” holes are included in tables of intercepts.


Other

substantive exploration

data


Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.
The Yaouré property has been subject to extensive exploration, including:

•  Soil sampling, surface mapping
•  Approximately 300,000 metres of drilling
•  Previous mining by

Compagnie Miniere d’Afrique

(CMA) and Cluff Mining
•  Airborne EM, gravity, radiometrics and magnetic surveys
•  2D & 3D seismic surveys.
The CMA Lode is presently being exploited by open pit mining.



Further work


The nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large-scale step-out drilling).
Perseus intends to continue drilling at CMA to delineate an Indicated Mineral Resource and to undertake such studies as are required to complete an economic evaluation of material that may be exploited by underground mining.

Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.



Primary Logo