Further encouraging results confirm the prospectivity of the São Domingos Project


For immediate release


2


2 July


2021


Serabi


Gold plc



(“


Serabi


” or the “Company”)


Further encouraging results confirm the


prospectivity


of the


S


ã


o Domingos


Project

Serabi Gold plc (AIM:SRB, TSX:SBI), the Brazilian-focused gold mining and development company, is pleased to update the market on exploration sampling and ongoing drilling from the São Domingos project where surface sampling and mapping has highlighted the potential of the Atacadão trend and early exploration drilling has confirmed the density and tenor of gold bearing structures. The Atacadão trend lies two kilometres to the south of the Toucano trend.


A PDF version of this announcement, including all images, can be accessed using the following link


https://bit.ly/3


B


BEHvQ


Highlights

  • Surface sampling totalling 69 rock chip samples with an average grade of 8.33g/t Au over an area of 1.5km x 1.5km and a maximum result of 204.77g/t Au, reflects the prospectivity of the area.


  • Significantly




    ,




    36% of samples returned over 3g/t Au with an average of grade of 22.5g/t Au.

  • Mapping has outlined a broad east-west corridor of parallel gold bearing structures transected by a NE-SW mineralised structure. Historic artisanal hard-rock shafts, located at the intersection of these structural orientations, have returned grades of up to 40.59g/t Au.
  • Drilling commenced in July on the Atacadão trend following up on the detailed mapping and rock chip sampling of this prospective trend. A north-south drill traverse, designed to cover the structural intersection has returned early positive results on multiple narrow vein sets grading up to 6.19g/t Au.
  • Separately, the Company has commissioned a regional airborne geophysics survey on São Domingos Project which is expected to be completed by the end of October 2021.


Mike Hodgson, CEO of Serabi, commented:

“These initial results of the surface sampling from the Atacadão trend are very encouraging. The distribution and grade of the rock chip samples demonstrates the strength and scale of the mineralised system. The objective of the drilling is to provide us with a better understanding on the geological controls on gold deposition and, while this is still at an early stage and on the periphery of the trend, the initial results are very promising. We look forward to updating the market with further results over the coming weeks.

“The Atacadão trend is the second prospect in the São Domingos project area to be drill tested. It lies two kilometres to the south of the Toucano trend where the Company has already identified a 50 metres wide alteration zone over a potential strike length of at least 600 metres containing multiple high-grade intercepts. The Company is proving up additional prospects at São Domingos for future drill-testing.

“Elsewhere, Serabi is drilling at the São Chico mine, five kilometres to the east of Atacadão, and now has two drill rigs testing the southern extensions of the Palito orebody. We look forward to updating the market with further result from each of these campaigns.”


Atacadão

Atacadão is one of multiple prospects in the São Domingos project acquired by Serabi in 2020. Since its acquisition, Serabi has been evaluating the potential of the project to host economic resources that could provide additional production ounces to the nearby Sao Chico mine.

Serabi geologists are assessing a series of target areas identified through geological, geophysical and geochemical methods, including Toucano, Maria Dio, Atacadão, Messias and Pedro trends. Additionally, new multi-element geochemical targets continue to be developed through ongoing regional exploration works.

The Atacadão prospect is currently undergoing part of the regional prospect assessment with first pass drilling to determine its economic potential.


To access an image of the


Proposed Drill Traverse across the


Atacadão


trend showing recent rock chip and drilling results


please use the following link –



https://bit.ly/3




w




WXX34



Proposed Drill Traverse across the




Atacadão




trend showing recent rock chip and drilling results.


To access an image of the São Domingos Project prospects and trends please use the following


link –



https://bit.ly/




3




wZF2Vs



S



ã



o Domingos Project prospects and trends.


Commissioning of Airborne Geophysical Survey

Serabi has also commissioned a fixed wing airborne magnetic and radiometric survey to cover the recently acquired São Domingos project. The survey will be completed by the end of the 2021 dry season and will complement the existing magnetic survey coverage Serabi has undertaken on the exploration tenement package.


Exploration


Results

Atacadão was initially tested in 2006 by the previous permit holders completing eleven drill holes along an 800 metre strike. This drilling intersected several narrow, but high-grade intersections within the trend. Although Serabi has not verified nor validated the results reported, drill intersected grades up to 59.97g/t were reported.

More recently Serabi geologists have undertaken a comprehensive field mapping and sampling exercise over a 1.5km x 1.5km area at the Atacadão prospect. As part of this activity, a total of 69 rock chip samples were collected from artisanal workings, geological exposures and field sites.

These rock chip samples returned a maximum of 204.77g/t Au (RKSR000684) and an average of 8.33g/t Au.


Significantly




,




36% of samples returned over 3g/t Au with an average of




grade of




22.5g/t Au.

The field mapping defined a 300 metre wide east-west corridor of stacked parallel gold bearing structures which has been cut by a strongly mineralised structure trending north east to south west. Historic activity undertaken by artisanal miners has included the development of a series of hard-rock shafts which have returned grades up to 40.59g/t Au at the intersection of these structural orientations.

Serabi has now commenced a “top-to-tail” drill traverse across the Atacadão trend to provide a baseline geological context to the trend initially targeting the structural intersections which are interpreted to control or focus the mineralisation. The drill traverse will comprise approximately 11 drill holes and complete a section of approximately 600 metres across the trend.

Results have been received for the first two holes of this traverse. Drill holes 21-AT001, 21-AT-002 and 21-AT-003 were completed on the northern end of the traverse. The holes were completed from the same drill location at different azimuths to test the two dominant vein orientations. These three holes are located in the hangingwall of the interpreted structural intersection.

Results of the first three holes are shown below, indicating the existence of multiple mineralised vein-sets within the hanging wall of the structural intersection target.


Hole


Target


East

North

RL


Depth (m)


Dip/


Azm

From


To


Apparent Width (m)


Gold Grade

(UTM- WGS84)

(UTM- WGS84)

(°/°UTM)

(Au g/t)

ATACADÃO DRILLING

21-AT-001

Atacadão

604780

9289533

270

270.39

-48/155

1.30

2.60

1.30

0.56

40.00

40.60

0.60

0.89

48.70

49.00

0.30

1.18

82.45

82.85

0.40

1.96

135.85

136.20

0.35

0.58

167.00

167.70

0.70

2.85

224.00

226.35

2.35

0.80

226.05

226.35

0.30

3.84

239.00

239.40

0.40

0.67

243.00

243.50

0.50

0.73

21-AT-002

Atacadão

604780

9289533

270

348.79

-45/133

8.00

9.45

1.45

0.93

9.00

9.45

0.45

1.23

94.15

95.00

0.85

1.37

108.95

109.50

0.55

3.80

119.15

120.35

1.20

1.99

144.10

145.00

0.90

6.19

200.00

200.55

0.55

1.27

223.00

223.90

0.90

0.61

232.00

232.60

0.60

1.00

296.00

296.30

0.30

0.81

297.00

297.30

0.30

0.98

303.00

303.45

0.45

0.83

21-AT-003

Atacadão

604752

9289438

264

130.65

-50/180

73.60

73.90

0.30

0.54

88.95

89.25

0.30

2.01
Reported intercepts calculated based on a minimum weighted average grade of 0.5g/t Au using a 0.5g/t Au weighted average lower cut and a maximum internal waste interval of 1.2m based on Serabi´s on-site lab reported analyses. The assay results reported above are those provided by the Company’s own on-site laboratory facilities at Palito and have not been independently verified. Serabi closely monitors the performance of its own facility against results from independent laboratory analysis for quality control purpose. As a matter of normal practice, the Company sends duplicate samples derived from a variety of the Company’s activities to accredited laboratory facilities for independent verification. Since mid-2019, over 10,000 exploration drill core samples have been assayed at both the Palito laboratory and certified external laboratory, in most cases the ALS laboratory in Belo Horizonte, Brazil. When comparing significant assays with grades exceeding 1 g/t gold, comparison between Palito versus external results record an average over-estimation by the Palito laboratory of 6.7% over this period. Based on the results of this work, the Company’s management are satisfied that the Company’s own facility shows sufficiently good correlation with independent laboratory facilities for exploration drill samples. The Company would expect that in the preparation of any future independent Reserve/Resource statement undertaken in compliance with a recognised standard, the independent authors of such a statement would not use Palito assay results without sufficient duplicates from an appropriately certificated laboratory.

Detailed rock chip locations and results are provided below.


Prospect

Sample

East

North

RL

Grid_ID

Au_ppm
ATACADAO RKSR000891 605002 9289450 325 WGS84_21S 3.10
ATACADAO RKSR000890 604973 9289447 325 WGS84_21S 19.98
ATACADAO RKSR000889 604708 9289447 236 WGS84_21S 0.14
ATACADAO RKSR000888 604717 9289417 232 WGS84_21S 0.24
ATACADAO RKSR000887 604717 9289417 232 WGS84_21S 0.14
ATACADAO RKSR000886 604730 9289389 245 WGS84_21S 0.24
ATACADAO RKSR000885 604730 9289389 245 WGS84_21S 0.32
ATACADAO RKSR000883 604733 9289378 247 WGS84_21S 5.73
ATACADAO RKSR000882 604733 9289378 247 WGS84_21S 10.13
ATACADAO RKSR000881 604466 9289425 238 WGS84_21S 0.30
ATACADAO RKSR000880 604486 9289415 234 WGS84_21S 0.19
ATACADAO RKSR000879 604496 9289084 232 WGS84_21S 0.82
ATACADAO RKSR000878 604496 9289084 232 WGS84_21S 5.37
ATACADAO RKSR000877 604542 9289182 231 WGS84_21S 44.68
ATACADAO RKSR000876 604733 9289052 224 WGS84_21S 8.97
ATACADAO RKSR000775 604871 9289163 238 WGS84_21S 8.03
ATACADAO RKSR000774 604871 9289163 238 WGS84_21S 0.53
ATACADAO RKSR000773 604780 9289201 228 WGS84_21S 1.13
ATACADAO RKSR000772 604780 9289201 228 WGS84_21S 2.39
ATACADAO RKSR000771 604780 9289201 228 WGS84_21S 0.40
ATACADAO RKSR000770 604780 9289201 228 WGS84_21S 37.6
ATACADAO RKSR000768 604423 9289405 219 WGS84_21S 18.2
ATACADAO RKSR000767 604423 9289405 219 WGS84_21S 13.28
ATACADAO RKSR000766 604423 9289405 219 WGS84_21S 4.35
ATACADAO RKSR000765 603593 9289486 223 WGS84_21S 0.03
ATACADAO RKSR000764 604436 9289442 236 WGS84_21S 2.26
ATACADAO RKSR000763 604726 9289224 232 WGS84_21S 2.18
ATACADAO RKSR000762 604726 9289224 232 WGS84_21S 0.06
ATACADAO RKSR000761 604417 9289148 230 WGS84_21S 16.29
ATACADAO RKSR000760 604417 9288948 231 WGS84_21S 0.29
ATACADAO RKSR000759 604417 9288948 231 WGS84_21S 0.64
ATACADAO RKSR000758 604473 9289018 240 WGS84_21S 0.14
ATACADAO RKSR000756 604114 9289448 230 WGS84_21S 16.98
ATACADAO RKSR000755 604114 9289448 230 WGS84_21S 5.50
ATACADAO RKSR000754 605306 9289600 324 WGS84_21S 0.14
ATACADAO RKSR000753 605306 9289600 324 WGS84_21S 1.17
ATACADAO RKSR000752 605286 9289591 330 WGS84_21S 0.22
ATACADAO RKSR000751 604532 9289052 235 WGS84_21S 1.50
ATACADAO RKSR000725 604325 9289087 245 WGS84_21S 0.04
ATACADAO RKSR000724 605058 9289533 336 WGS84_21S 0.68
ATACADAO RKSR000723 605078 9289533 336 WGS84_21S 1.67
ATACADAO RKSR000722 605089 9289504 339 WGS84_21S 0.23
ATACADAO RKSR000721 604652 9289179 226 WGS84_21S 0.90
ATACADAO RKSR000719 604467 9289005 246 WGS84_21S 0.68
ATACADAO RKSR000718 604870 9289150 268 WGS84_21S 2.67
ATACADAO RKSR000717 604823 9289193 276 WGS84_21S 0.10
ATACADAO RKSR000715 604868 9289262 304 WGS84_21S 16.92
ATACADAO RKSR000714 604900 9289508 306 WGS84_21S 19.59
ATACADAO RKSR000713 604785 9289435 265 WGS84_21S 1.53
ATACADAO RKSR000712 604785 9289435 265 WGS84_21S 0.45
ATACADAO RKSR000711 604857 9289580 255 WGS84_21S 3.57
ATACADAO RKSR000710 604815 9289540 230 WGS84_21S 5.08
ATACADAO RKSR000709 604815 9289540 230 WGS84_21S 11.84
ATACADAO RKSR000708 604430 9289404 234 WGS84_21S 0.33
ATACADAO RKSR000707 604430 9289404 234 WGS84_21S 1.36
ATACADAO RKSR000706 604834 9289273 261 WGS84_21S 15.14
ATACADAO RKSR000705 604756 9289195 241 WGS84_21S 0.14
ATACADAO RKSR000704 604803 9289212 243 WGS84_21S 0.11
ATACADAO RKSR000703 604803 9289212 243 WGS84_21S 0.27
ATACADAO RKSR000702 604779 9289211 242 WGS84_21S 40.59
ATACADAO RKSR000701 604779 9289211 242 WGS84_21S 4.37
ATACADAO RKSR000690 605342 9289296 291 WGS84_21S 1.96
ATACADAO RKSR000685 604553 9289170 230 WGS84_21S 0.57
ATACADAO RKSR000684 604553 9289170 230 WGS84_21S 204.77
ATACADAO RKSR000675 604873 9289151 275 WGS84_21S 0.68
ATACADAO RKSR000674 604733 9289380 245 WGS84_21S 2.15
ATACADAO RKSR000455 604723 9289070 238 WGS84_21S 0.08
ATACADAO RKSR000454 604428 9288966 242 WGS84_21S 0.26
ATACADAO RKSR000453 604428 9288966 242 WGS84_21S 2.42
The assay results reported in the table above are those provided by the Company’s own on-site laboratory facilities at Palito and have not been independently verified. Serabi closely monitors the performance of its own facility against results from independent laboratory analysis for quality control purpose. As a matter of normal practice, the Company sends duplicate samples derived from a variety of the Company’s activities to accredited laboratory facilities for independent verification. Since mid-2019, over 10,000 exploration drill core samples have been assayed at both the Palito laboratory and certified external laboratory, in most cases the ALS laboratory in Belo Horizonte, Brazil. When comparing significant assays with grades exceeding 1 g/t gold, comparison between Palito versus external results record an average over-estimation by the Palito laboratory of 6.7% over this period. Based on the results of this work, the Company’s management are satisfied that the Company’s own facility shows sufficiently good correlation with independent laboratory facilities for exploration drill samples. The Company would expect that in the preparation of any future independent Reserve/Resource statement undertaken in compliance with a recognised standard, the independent authors of such a statement would not use Palito assay results without sufficient duplicates from an appropriately certificated laboratory.

The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 as it forms part of UK Domestic Law by virtue of the European Union (Withdrawal) Act 2018.

The person who arranged for the release of this announcement on behalf of the Company was Clive Line, Director.


Enquiries:

Serabi Gold plc
Michael Hodgson Tel: +44 (0)20 7246 6830
Chief Executive Mobile: +44 (0)7799 473621
Clive Line Tel: +44 (0)20 7246 6830
Finance Director Mobile: +44 (0)7710 151692
Email: [email protected]
Website: www.serabigold.com
Beaumont Cornish Limited

Nominated Adviser and Financial Adviser
Roland Cornish / Michael Cornish Tel: +44 (0)20 7628 3396
Peel Hunt LLP

Joint UK Broker
Ross Allister / Alexander Allen Tel: +44 (0)20 7418 9000
Tamesis Partners LLP

Joint UK Broker
Charlie Bendon / Richard Greenfield Tel: +44 (0)20 3882 2868
Camarco

Financial PR
Gordon Poole / Nick Hennis Tel: +44(0) 20 3757 4980

Copies of this announcement are available from the Company’s website at

www.serabigold.com

.

Neither the Toronto Stock Exchange, nor any other securities regulatory authority, has approved or disapproved of the contents of this announcement.


See



www.serabigold.com



for more information and follow us on twitter @Serabi_Gold


GLOSSARY OF TERMS



Ag

means silver.


Au

means gold.


assay

in economic geology, means to analyse the proportions of metal in a rock or overburden sample; to test an ore or mineral for composition, purity, weight or other properties of commercial interest.


CIM

means the Canadian Institute of Mining, Metallurgy and Petroleum.


chalcopyrit

e”
is a sulphide of copper and iron.


Cu

means copper.


cut-off grade

the lowest grade of mineralised material that qualifies as ore in a given deposit; rock of the lowest assay included in an ore estimate.




dacite


porphyry intrusive”
a silica-rich igneous rock with larger phenocrysts (crystals) within a fine-grained matrix


deposit

is a mineralised body which has been physically delineated by sufficient drilling, trenching, and/or underground work, and found to contain a sufficient average grade of metal or metals to warrant further exploration and/or development expenditures; such a deposit does not qualify as a commercially mineable ore body or as containing ore reserves, until final legal, technical, and economic factors have been resolved.


electromagnetics

is a geophysical technique tool measuring the magnetic field generated by subjecting the sub-surface to electrical currents.

“garimpo”
is a local artisanal mining operation


garimpeiro

is a local artisanal miner.


geochemical

refers to geological information using measurements derived from chemical analysis.


geophysical

refers to geological information using measurements derived from the use of magnetic and electrical readings.


geophysical


techniques

include the exploration of an area by exploiting differences in physical properties of different rock types. Geophysical methods include seismic, magnetic, gravity, induced polarisation and other techniques; geophysical surveys can be undertaken from the ground or from the air.


gossan

is an iron-bearing weathered product that overlies a sulphide deposit.


grade

is the concentration of mineral within the host rock typically quoted as grams per tonne (g/t), parts per million (ppm) or parts per billion (ppb).


g/t

means grams per tonne.

“granodiorite”
is an igneous intrusive rock similar to granite.


hectare

” or a “

ha

is a unit of measurement equal to 10,000 square metres.

“igneous”
is a rock that has solidified from molten material or magma.


IP

refers to induced polarisation, a geophysical technique whereby an electric current is induced into the sub-surface and the conductivity of the sub-surface is recorded.

“intrusive”
is a body of rock that invades older rocks.

“Indicated Mineral Resource
is that part of a Mineral Resource for which quantity, grade or quality, densities, shape and physical characteristics can be estimated with a level of confidence sufficient to allow the appropriate application of technical and economic parameters, to support mine planning and evaluation of the economic viability of the deposit. The estimate is based on detailed and reliable exploration and testing information gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes that are spaced closely enough for geological and grade continuity to be reasonably assumed.

“Inferred Mineral Resource”
is that part of a Mineral Resource for which quantity and grade or quality can be estimated on the basis of geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity. The estimate is based on limited information and sampling gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes.

“Inferred Mineral Resource”
‟ is that part of a Mineral Resource for which quantity and grade or quality can be estimated on the basis of geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity. The estimate is based on limited information and sampling gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes.

“mineralisation”
the concentration of metals and their chemical compounds within a body of rock.

“mineralised”
refers to rock which contains minerals e.g. iron, copper, gold.

“Mineral


Resource



is a concentration or occurrence of diamonds, natural solid inorganic material, or natural solid fossilized organic material including base and precious metals, coal, and industrial minerals in or on the Earth’s crust in such form and quantity and of such a grade or quality that it has reasonable prospects for economic extraction. The location, quantity, grade, geological characteristics and continuity of a Mineral Resource are known, estimated or interpreted from specific geological evidence and knowledge.

“Mineral Reserve”
is the economically mineable part of a Measured or Indicated Mineral Resource demonstrated by at least a Preliminary Feasibility Study. This Study must include adequate information on mining, processing, metallurgical, economic and other relevant factors that demonstrate, at the time of reporting, that economic extraction can be justified. A Mineral Reserve includes diluting materials and allowances for losses that may occur when the material is mine




Mo


-Bi-As-Te-W-Sn”
Molybdenum-Bismuth-Arsenic-Tellurium-Tungsten-Tin

“monzogranite”
a biotite rich granite, often part of the later-stage emplacement of a larger granite body.

“mt”
means million tonnes.

“ore”
means a metal or mineral or a combination of these of sufficient value as to quality and quantity to enable it to be mined at a profit.

“oxides”
are near surface bed-rock which has been weathered and oxidised by long term exposure to the effects of water and air.

“ppm”
means parts per million.

“Probable Mineral Reserve”
is the economically mineable part of an Indicated and, in some circumstances, a Measured Mineral Resource demonstrated by at least a Preliminary Feasibility Study. This Study must include adequate information on mining, processing, metallurgical, economic, and other relevant factors that demonstrate, at the time of reporting, that economic extraction can be justified.

“Proven Mineral Reserve”
is the economically mineable part of a Measured Mineral Resource. A Proven Mineral Reserve implies a high degree of confidence in the Modifying Factors

“saprolite”
is a weathered or decomposed clay-rich rock.


sulphide

refers to minerals consisting of a chemical combination of sulphur with a metal.


vein

is a generic term to describe an occurrence of mineralised rock within an area of non-mineralised rock.


VTEM

refers to versa time domain electromagnetic, a particular variant of time-domain electromagnetic geophysical survey to prospect for conductive bodies below surface.


Assay Results


The assay results reported within this release are those provided by the Company’s own on-site laboratory facilities at Palito and have not been independently verified. Serabi closely monitors the performance of its own facility against results from independent laboratory analysis for quality control purpose. As a matter of normal practice, the Company sends duplicate samples derived from a variety of the Company’s activities to accredited laboratory facilities for independent verification. Since mid-2019, over 10,000 exploration drill core samples have been assayed at both the Palito laboratory and certified external laboratory, in most cases the ALS laboratory in Belo Horizonte, Brazil. When comparing significant assays with grades exceeding 1 g/t gold, comparison between Palito versus external results record an average over-estimation by the Palito laboratory of 6.7% over this period. Based on the results of this work, the Company’s management are satisfied that the Company’s own facility shows sufficiently good correlation with independent laboratory facilities for exploration drill samples. The Company would expect that in the preparation of any future independent Reserve/Resource statement undertaken in compliance with a recognised standard, the independent authors of such a statement would not use Palito assay results without sufficient duplicates from an appropriately certificated laboratory.


Qualified Persons Statement


The scientific and technical information contained within this announcement has been reviewed and approved by Michael Hodgson, a Director of the Company. Mr Hodgson is an Economic Geologist by training with over 26 years’ experience in the mining industry. He holds a BSc (Hons) Geology, University of London, a MSc Mining Geology, University of Leicester and is a Fellow of the Institute of Materials, Minerals and Mining and a Chartered Engineer of the Engineering Council of UK, recognising him as both a Qualified Person for the purposes of Canadian National Instrument 43-101 and by the AIM Guidance Note on Mining and Oil & Gas Companies dated June 2009.


Forward Looking Statements


Certain statements in this announcement are, or may be deemed to be, forward looking statements. Forward looking statements are identified by their use of terms and phrases such as ‘‘believe’’, ‘‘could’’, “should” ‘‘envisage’’, ‘‘estimate’’, ‘‘intend’’, ‘‘may’’, ‘‘plan’’, ‘‘will’’ or the negative of those, variations, or comparable expressions, including references to assumptions. These forward-looking statements are not based on historical facts but rather on the Directors’ current expectations and assumptions regarding the Company’s future growth, results of operations, performance, future capital and other expenditures (including the amount, nature and sources of funding thereof), competitive advantages, business prospects and opportunities. Such forward looking statements reflect the Directors’ current beliefs and assumptions and are based on information currently available to the Directors. A number of factors could cause actual results to differ materially from the results discussed in the forward-looking statements including risks associated with vulnerability to general economic and business conditions, competition, environmental and other regulatory changes, actions by governmental authorities, the availability of capital markets, reliance on key personnel, uninsured and underinsured losses and other factors, many of which are beyond the control of the Company. Although any forward-looking statements contained in this announcement are based upon what the Directors believe to be reasonable assumptions, the Company cannot assure investors that actual results will be consistent with such forward looking statements.


ENDS


Attachment



Primary Logo